LAT Pull Down Attachment for Power Cage, Multi-Functional Power Rack Optional Cable Pulley System for Home Gym, Addition for ULTRA FUEGO Power Cage(LAT Pull Down Attachment Only)

Price: $99.99
(as of Feb 12, 2026 12:00:52 UTC – Details)


ULTRA FUEGO lat pull down attachment is designed for the ULTRA FUEGO power cage. If the power cage or rack you currently have is not the one from our brand ULTRA FUEGO, please contact us before purchasing this lat pull down attachment.
Here are the factors that will affect the applicability of the lat pull down attachment:
(1)Please check the height of your power cage.
The ULTRA FUEGO power cage has vertical frames with the height 81’’(205cm), and the height of the lat pull down attachment measured from the top is 81’’(205cm) as well. If you power cage is higher or lower than the ULTRA FUEGO one, the lat pull down attachment will not fit.
(2)Please check if your power cage has the top frame and connection bolt holes at the lower cross beam.
Be sure that there are 2 bolt holes at the lower cross beam(the beam that used to connect 2 base frames or stabilizers), or you will not be able to attach the lat pull down attachment to your power cage.
And be sure that your power cage has a top frame to connect the rear vertical frames, or the upper frame of the lat pull down attachment will not be able to be fixed securely. To be specific, the distance between the 2 bolt holes is 3.15’’(8cm), and the height of the top frame measured from the top of it is 78.2’’(200.5cm).

The above 2 points are the major factors that the power cage you have must meet at the same time. For your safety, we suggest you not to modify, cut or drill holes on your equipment to add the lat pull down attachment. If you have made check of the 2 points but still don’t know if the lat pull down attachment will work for your power cage, or if you don’t know the parts that we mentioned above, or if you have any assembly issue, please contact us and we are more than willing to help.
Common Troubleshooting Steps
1.Cables or pulley covers get stuck or damaged when using the pulley system
Possible reasons:
① User incorrectly attach the upper cable(part number 28#) and lower cable(part number 29#).
② The upper cable is routed incorrectly.

Troubleshooting steps & solution:
① Check if the upper cable and lower cable are attached incorrectly.
The upper cable is much longer than the lower cable. The user can remove the 2 cables from the pulley system, and then put them on the ground to identify which one is the upper cable and which one is the lower cable. Be sure to attach the longer upper cable to the upper part of the pulley system.
②Check if the upper cable is correctly routed above the upper frame(part number 1#).
The upper frame has 2 opening parts for attaching & fixing the pulley wheels. The routing of the upper cable should be outside and above the 2 opening parts, that’s to say, the upper cable should not go inside the upper frame. Or the coating of the cables will be damaged. The user can step on a ladder to have a close check of the opening parts and the upper cable to make sure the routing is correct.

2.Cables are too loose to use or not smooth enough.
Possible reasons:
① User doesn’t adjust the lower M10x40 Allen bolt(part number 23#) on the pulley brackets(part number 4#).
②The bushing inside the weight plate holder(part number 3#) is damaged.
③ The cables and pulley wheels have dust piled up on them.

Troubleshooting steps & solution:
① Check if the M10x40 Allen bolt has been adjusted to the suitable bolt hole of the pulley brackets.
The way the accessories such straight handle and ankle strap being attached will affect the length of the lower cable. If the user finds the cables are too loose to use, he or she can move the lower M10x40 Allen bolt on the pulley brackets upwards to the second or third bolt hole counted from the bottom, tighten the bolt and aircraft nuts and test if the tightness is suitable for the following training. This way can adjust the cable to be tighter.
② Check the bushing inside the weight plate holder.
The weight plate holder has a rubber bushing inside, which help this part glide on smoothly. If the user feels that the pulley system is not smooth enough and applying lubricant such as WD40 will not help, he or she can remove the weight plate holder from the vertical frame of the lat pull down attachment to make a close check. If the rubber bushing inside is deformed or damaged, the entire weight plate holder has to be replaced.
③ Check the condition of the cables and pulley wheels.
For long time use, it is normal that the dust in the air gets piled up on the cables and pulley wheels. We suggest the user to clean up the cables and pulley wheels with cleaning cloth regularly and then apply the WD40 to the cables for smooth training experience.

You can contact us to get the video link of assembly video or guidance for certain common assembly issues.
A KIND REMINDER & PRE_PURCHASE NOTES: ULTRA FUEGO lat pull down attachment is designed for the ULTRA FUEGO power cage, which is not a universal product for all power cages. Therefore, the lat pull down attachment itself has limited compatibility. If you would like to use this lat pull down attachment with power cage or squat rack of other brands, please contact us first to confirm whether the product is compatible with the equipment you have.
A COMPACT ADDITION TO ULTRA FUEGO POWER CAGE: ULTRA FUEGO lat pull down attachment is designed only for our ULTRA FUEGO power cage. Designed with a smooth double cable pulley system, it can assist you to do workouts such as lat pull-downs, rows and triceps extensions. The maximum training mass of the cable is 176.4 lbs.
EQUIPPED WITH PRACTICAL ACCESSORIES: ULTRA FUEGO lat pull down attachment contains these versatile and practical accessories: lat pull-down bar, straight bar, tricep rope, a pair of cable handles and ankle strap. It makes it possible for you to enrich your daily training routine with these accessories.
1’’ & 2’’ WEIGHT PLATES STORAGE AVAILABLE: Adding two weight storage tubes to the pulley system, you can freely increase or decrease the weights according to your training plan. The weight storage tubes have detachable sleeves on the outside with 2’’ diameter, so you can store 2’’ Olympic weight plates. When the sleeves are removed, you can store 1’’ weight plates. 1’’ & 2’’ spring collars are included in the packaging as well.
FULL BODY WORKOUT + MORE TRAINING POSSIBILITIES: ULTRA FUEGO lat pull down attachment is a reliable piece of equipment that can help you to carry out full body workout such as lat pull down, lat pull over, seated rows, bent over rows, inverted rows, tricep extensions and so on. It helps sculpt muscles on your arms, shoulders, back, chest and abdomen. You can explore more training possibilities with it.
KEY DIMENSIONS: The assembled dimension of the lat pull down attachment: 81’’(Height), 12’’(width of the base frame)/26’’(width of the upper frame). When you attach the lat pull down attachment to the ULTRA FUEGO power cage, the assembled dimension is 63’’(depth) x 47’’(width) x 82.7’’(height). Please check if your ceiling is high enough for the product.